AIO Wasserkühlung für Geforce RTX 3080 FE GPU

KOI Alphacool Eiswolf 2 AIO - 360mm RTX 3080 Founders Edition mit Backplate

Réf. d'article : 1020891
N° de fabricant : 14413
EAN: 4250197144131
Poids: 4,86 kg
Verfügbar: Il y a encore plus de 25 articles disponibles

1946 Les visiteurs montrent de l'intérêt

358 Les clients ont récemment acheté ce produit.

en stock

Paiement échelonné disponible entre 400€ et 5000€ de valeur de marchandise

149,98 € *

Prix dont TVA plus frais de port

Alphacool Tuyau AlphaTube TPV 12,7/7,6 - Noir Matte 3,3m (10ft) Boîte au détail

18,78 €*

Alphacool HF compression Fitting TPV - 12,7/7,6mm Straight - Black - 6pcs Kit

16,88 €*

Alphacool Eisblock XPX Aurora PRO - Acryl Chrome Digital RGB

74,23 €*

Alphacool Tec Protect 2 Clear 1000ml

13,88 €*

Avertissez-moi lorsque l'article sera de nouveau disponible.

KOI Alphacool Eiswolf 2 AIO - 360mm RTX 3080 Founders Edition with Backplate

149,98 € 0,00 € Prix dont TVA plus frais de port

Alphacool Tuyau AlphaTube TPV 12,7/7,6 - Noir Matte 3,3m (10ft) Boîte au détail

18,78 €*

Alphacool HF compression Fitting TPV - 12,7/7,6mm Straight - Black - 6pcs Kit

16,88 €*

Alphacool Eisblock XPX Aurora PRO - Acryl Chrome Digital RGB

74,23 €*

Alphacool Tec Protect 2 Clear 1000ml

13,88 €*

The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based...plus

Fermer menu

Informations sur le produit

The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans.

Fullcover Waterblock?
The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler.

Pump
The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal.

Fittings and Tubing
As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly.

Expandability
By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together.

Lighting and fans
The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. statistical pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm.

NexXxoS Radiator
As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success.

The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop.

Technical note!
Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there.

Compatibility:
- NVIDIA GeForce RTX 3080 Founders Edition
- NVIDIA GeForce RTX 3080 Ti Founders Edition

Data radiator
L x W x H	395 x 124 x 30mm (+/- 3%)
Material cooling fins	Copper
Material chambers	Copper
Material cooling channels	Copper
Material threads	Brass
Material outer housing	stainless steel
G 1/4“ threads	2 x for tubes (+ 1x Fillport G1/4“)
For fan size	120 mm
Possible fan assembly	3 x one-sided / 6 x both-sided

Data cooler and pump
L x W x H	204,5 x 121,5 x 46 mm
Material cooler bottom	Chrome plated copper
Material cooler top	PMMA
Threads	2 x G1/4“
Pump type	DC-LT 2
Pump speed	2600 rpm (+/- 10%)
Head of delivery	1 m
Maximum flow rate	72 L/h
Voltage	6-13.5V DC
Power consumption	3.2W
MTBF	50.000 h

Data liquid
Color	clear
Ingredient 1	Destilled water (CAS-number 7732-18-5)
Ingredient 2	Glysantin (CAS-number 1017-21-1)
Working temperatures	-15 C° / +90 °C

Data quick fasteners
L x D	95 x 27 mm
Material	Nylon
For tube size	12,7 / 7,6 mm
Color	Black

Data fittings
L x D straight fitting	24 x 18 mm
Quantity straight fittings	2x
L x B x H 90° fitting	35 x 27 x 17 mm
Quantity 90° fittings	2x
For tube size	12,7 / 7,6 mm
Material fittings	Brass

Data tube
Length	50 cm
Material tube	TPV (EPDM/PP)
Color	Matt black
Tube size	12,7 / 7,6 mm
Hardness grade	35 Shore-A to 50 Shore-D
Working temperature	-50 to +155 °C

Data fan
Speed	0 - 2500 RPM
Static pressure	3,17 mm H2O
Air flow rate	119,8 m³/h
Bearings	Sleeve bearing
Fan connector	4-Pin PWM
Connection Digital aRGB	3-Pin JST + 3-Pin 5V
Dimensions	120 x 120 x 25 mm
Net weight	187 g
Max working temperature	60 °C

Remarque sur l'utilisation
A n'utiliser qu'en combinaison avec des liquides de refroidissement à eau clairs et transparents. Les particules et les additifs contenus dans les liquides Pastell peuvent obstruer et endommager durablement les produits de refroidissement à eau tels que les radiateurs, les pompes, les radiateurs et les tuyaux. Cela peut également entraîner l'annulation de la garantie du fabricant.

Liens complémentaires

Fermer menu

Jetzt nützliche Details ansehen... plus

Fermer menu

Produktdetails

fabricant:	Alphacool
Vorbefüllt:	Ja
Radiatorgröße:	360mm
Radiatordicke:	29 - 39mm
Radiatorabmessung:	395 x 124 x 30mm
Sockel:	Nvidia GeForce

Questions et réponses plus

Questions et réponses

Frage von Lucas V. vom 06. June 2023

I want to extand the loop to 1m each tube. i need : 1*Alphacool Eiswolf 2 AIO - 360mm RTX 3080 Founders Edition with Backplate 1*Alphacool tube AlphaTube TPV 12,7/7,6 - black matte 3,3m (10ft) retail box 2*Alphacool HF quick release connector kit TPV - Eisbaer compatible - black 1*Hose cutter that's all ???

Antwort von Administrator vom 06. June 2023

Yes and you need some liquid to fill the aio up again.

Vous avez une question ?

Lire, écr. et débatt. des analyses…plus

Fermer menu

Évaluations de clients pour "KOI Alphacool Eiswolf 2 AIO - 360mm RTX 3080 Founders Edition with Backplate"

Écrire une évaluation

Les évaluations sont publiées après vérification.

Alphacool Eiswolf 2 AIO - 360mm RTX 3080 Founders Edition with Backplate

Liens complémentaires

Conseil personnel

Livraison rapide depuis l'Allemagne

Conseil et service professionnels

Bon rapport qualité-prix

Paiement sécurisé

Supplément gratuit

Droit de retour de 30 jours