Aquacomputer cuplex kryos NEXT mit VISION AM4/AM5, Acetal/Nickel

Réf. d'article : 1014539
N° de fabricant : 21714
EAN: 4260473311164
Poids: 0,673 kg
Verfügbar: Es sind weniger als 5 Artikel verfügbar

197 Les visiteurs montrent de l'intérêt

23 Les clients ont récemment acheté ce produit.

en stock

Paiement échelonné disponible entre 400€ et 5000€ de valeur de marchandise

100,90 € *

Prix dont TVA plus frais de port

Avertissez-moi lorsque l'article sera de nouveau disponible.

WAC Aquacomputer cuplex kryos NEXT avec VISION AM4/AM5 , acétal / nickel

100,90 € 0,00 € Prix dont TVA plus frais de port

The cuplex kryos NEXT marks a new milestone in CPU water block development. Every detail has...plus

Fermer menu

Informations sur le produit

The cuplex kryos NEXT marks a new milestone in CPU water block development. Every detail has been analyzed, optimized and tested to achieve perfection in cooling performance, installation procedure and product features. The result is not just a CPU water block with outstanding performance - it is a product series with various models differing in color and functionality. The VARIO models are the first CPU water blocks globally to incorporate a real-time adjustable base - never before has it been possible to adjust the geometry of a CPU block to perfectly fit the CPU while the PC is in operation. Models with VISION module are equipped with modern electronics: High resolution OLED display, integrated water temperature sensor and USB interface are just three of the features.

Base part with micro structure
The base part of the cuplex kryos NEXT is equipped with an extremely fine micro structure, the structural width is lower than 200 µm. The coolant is injected centrally through a slot-shaped nozzle and then runs to both sides of the structure. The base itself is manufactured from copper, nickel plated copper or .925 sterling silver depending on model.

Retention system
The cuplex kryos NEXT retention system consists of 2.5 mm thick stainless steel plates equipped with nickel plated spring cups. Springs and knurled screws secure the water block on the motherboard, the retention system has a very clean look when installed. All retention system versions feature a mechanical stop for optimum clamping force and even force distribution. The knurled screws can be installed by hand, additionally a hexagon socket wrench can be used for easy installation.
Water blocks for socket 115x or AM3 include a steel back plate with silicone insulation to stabilize the CPU region of the motherboard. Socket 2011 or AM4 motherboards already include a back plate as part of the CPU socket, therefore no additional back plate is required.
For optimum performance, every cuplex kryos NEXT ships with outstanding thermal compound. A syringe with 0.5 grams of Thermal Grizzly Kryonaut is included, complete with plastic spatula. This compound has a high thermal conductivity and spreads out thin and evenly between CPU and water block due to its low viscosity. The amount is sufficient for approximately five applications.

VISION: Integrated electronics
The VISION variants of the cuplex kryos NEXT are equipped with a microcontroller board and OLED display. The features include:

Water temperature sensor integrated in water block
Connector for flow sensor, can alternatively be used as alarm output
USB interface
aquabus interface for communication with an aquaero 5 or 6
Customizable display output
Various hardware data can be displayed from the aquasuite software, for example current CPU load
The acrylic glass variants of the cuplex kryos NEXT with VISION are additionally equipped with a RGB LED that can be controlled depending on temperature or via USB.
Due to limited space, a maximum of two cables can be threaded into the water block. The following combinations are possible:
USB and aquabus
USB and flow sensor or alarm output
aquabus and flow sensor or alarm output

Color variants
The top part of the water block is available in various materials and coatings:
Acetal black: Shiny black high-tech plastic
Acrylic glass: Transparent body suitable for illumination
Copper: Reddish gloss
Nickel plated brass: Bright metallic gloss
PVD plated brass: High quality multi layer coating, dark metallic gloss

Material combination
Acetal/nickel: Top part black acetal, base nickel plated copper

Technical details

Dimensions:Socket AM4: 111 x 75 x 22 mm (not including screws)
Connection threads: G1/4
Distance between threads: 24 mm

Scope of delivery

Water block
Mounting material (screws, springs, etc.)
Thermal compound Thermal Grizzly Kryonaut, approx. 0.5 grams in syringe
Plastic spatula
Instruction manual

Reviews

Liens complémentaires

Fermer menu

Jetzt nützliche Details ansehen... plus

Fermer menu

Produktdetails

connecteur:	2x G1/4"
Plaque de fond:	Kupfer vernickelt
Dimensions (L x l x H):	111 x 75 x 22mm
fabricant:	Aquacomputer
Sockel:	AMD AM4
Couvercle du matériau:	Kohlefaser

Questions et réponses plus

Questions et réponses

1 Frage(n) in anderen Sprachen.
Klicken Sie hier, um diese Frage(n) anzuzeigen.

Frage von Guest #420496 vom 01. January 2024

ist der geeignet für einen 7950x3d ?

Antwort von Administrator vom 01. January 2024

Ja, Der Block passt auf den Sockel und hat eine ordentliche Kühlleistung

Vous avez une question ?

Lire, écr. et débatt. des analyses…plus

Fermer menu

Évaluations de clients pour "WAC Aquacomputer cuplex kryos NEXT avec VISION AM4/AM5 , acétal / nickel"

Écrire une évaluation

Les évaluations sont publiées après vérification.

Aquacomputer cuplex kryos NEXT avec VISION AM4/AM5 , acétal / nickel

Liens complémentaires

Conseil personnel

Livraison rapide depuis l'Allemagne

Conseil et service professionnels

Bon rapport qualité-prix

Paiement sécurisé

Supplément gratuit

Droit de retour de 30 jours