Watercool HEATKILLER D5 PWM

Article no: 1025883
Manufacturer no: 30060
EAN: 4251312607142
Weight: 0,34 kg
Available: Es sind weniger als 5 Artikel verfügbar

494 Visitors show interest

4 Customers have recently purchased this product.

in stock

Payment by instalments available between 400€ and 5000€ value of goods

€94.95 *

Prices incl. VAT plus shipping costs

Please inform me as soon as the product is available again.

PUM Watercool HEATKILLER D5 PWM

€94.95 €0.00 Prices incl. VAT plus shipping costs

Spherical engine principle invented by Laing The D5-PWM DC pump works according to the... more

Close menu

Product information

Spherical engine principle invented by Laing

The D5-PWM DC pump works according to the spherical motor principle invented by Laing. The only moving part is a spherically shaped, permanent magnet rotor/impeller unit, which is supported by a wear-resistant, ultra-hard ceramic bearing ball.

In this case, there is no conventional shaft bearing with bearing bushes. The development of bearing play and thus an increase in operating noise is not possible due to the design. The pump remains quiet and low-noise throughout its entire running time.

The self-adjusting bearing is lubricated and cooled directly by the pumped medium (wet rotor pump). Separate maintenance is not necessary. All parts that come into contact with the medium are completely corrosion-resistant.

Due to the ball motor principle, it is generally not possible for the pump to become blocked. The pump starts up safely even after a long period of downtime. The permanent magnet motor technology ensures that the pump is very efficient.

Speed controller integrated into the stator
The speed of the pump can be continuously adjusted over a wide range using a speed controller built into the stator. This can be used to set a desired hydraulic output, but also to limit the electrical power consumption. The pump always starts with the same torque regardless of the set speed, so that reliable starting is guaranteed even at the lowest power level.

Watercool Pump Interface
The Watercool Pump Interface (WPI) is the central interface for connecting pumps. In addition to the supply voltages, PWM, RPM and aRGB signals are also transmitted via a single cable. The cable routing is therefore compact and elegant.

Optimized for HEATKILLER TUBE and MO-RA IV Tank
The pump is delivered without any attachments. A suitable pump attachment (e.g. HEATKILLER® D5-TOP) or an expansion tank with D5 option (e.g. MO-RA IV Tank or HEATKILLER TUBE) is required for operation. The electrical connection is made via the Watercool Pump Interface (WPI).

Technical data

Dimensions (LxWxH): 65x65x57mm
Design: Electronically commutated spherical motor
Materials: Acetal, stainless steel 1.4571, PPS-GF40, EPDM O-rings, aluminum oxide, hard carbon
Nominal voltage: 12V DC
Power consumption: max. 30W
Permissible voltage range: 8-24V DC
discharge head at 12V: 3.7m
Maximum flow rate: 1500 l/h
Pump medium: water, water-glycol mixtures
Max. system temperature: 60°C
System pressure: max. 1.5 bar
Power connector: 6Pin WPI
Speedometer signal: yes (via 6Pin WPI)
PWM: yes (via 6Pin WPI)

scope of delivery

1x HEATKILLER D5 PWM

Further links

Close menu

Jetzt nützliche Details ansehen... more

Close menu

Produktdetails

Farbe:	schwarz
Hersteller:	Watercool

Questions & answers... more

Questions & answers

No questions have been asked so far.

Do you have a question?

Read, write and discuss reviews... more

Close menu

Customer evaluation for "PUM Watercool HEATKILLER D5 PWM"

Write an evaluation

Evaluations will be activated after verification.

Watercool HEATKILLER D5 PWM

Further links

Personalised advice

Fast delivery from Germany

Professional advice and service

Good price-performance ratio

Secure payment

Free encore

30 days right of return