Aquacomputer aquainlet PRO 150 ml with nano coating, G1/4

AGB Aquacomputer aquainlet PRO 150 ml mit Nanobeschichtung, G1/4

Article no: 45362
Manufacturer no: 34065
EAN: 4260073417068
Weight: 0,627 kg
Available: There are more than 10 units available

241 Visitors show interest

113 Customers have recently purchased this product.

in stock

Payment by instalments available between 400€ and 5000€ value of goods

€58.98 *

Prices incl. VAT plus shipping costs

Please inform me as soon as the product is available again.

Terms and Conditions Aquacomputer aquainlet PRO 150 ml with nano coating, G1/4

€58.98 €0.00 Prices incl. VAT plus shipping costs

The reservoirs aquainlet PRO and aquainlet XT are designed to be directly mounted onto an... more

Close menu

Product information

The reservoirs aquainlet PRO and aquainlet XT are designed to be directly mounted onto an aquastream XT or Eheim 1046 pump. The design is perfectly matched to the pump, after installation pump and reservoir form a virtually seamless unit. In particular, the mounting rails of the pump are extended into the reservoir, which for the first time allows for the mounting plate to be installed beneath the center of gravity. This is especially helpful when using rubber decouplers or a shoggy sandwich. When installed onto the suction port of the pump, an o-ring seals the connection between pump and reservoir and two latches secure the reservoir to the pump housing, preventing accidental release of the bayonet coupling between pump cover and pump housing. Two connection threads for the return line located at the front and the side of the unit allow for flexible installation options and are paticularly useful if the reservoir is to be installed with limited space.

The reservoirs aquainlet PRO and aquainlet XT are closely related to the aqualis series and are also equipped with a borosilicate glass tube. In contrast to acrylic glass, which is often used for tube reservoirs, borosilicate glass is extremele hard and scratch-resistant, features superb thermal and chemical resistance and a very low thermal expansion. The glass tube has an outer diameter of 50 mm and a wall thickness of 5 mm. Base and top of the aquainlet reservoirs are made from Delrin and connected by a stainless steel rod.

The aquainlet XT variants feature an acrylic window in the base part and one LED (5 mm size) can be installed into the base part. Additionally, the XT variants feature an electronic fill level sensor with USB and aquabus interface, a programmable alarm output and an external temperature sensor input. For monitoring and configuration, the aquasuite software can be downloaded free of charge. In addition to the USB interface, the 4-pin aquabus interface can be used to directly connect the fill level sensor to an aquaero 5 controller (not included in delivery). The alarm output can be configured to be used as a rpm signal to be connected to a fan connector with fault detection (for example motherboard fan headers) or to be used as a switched output for example to connect a LED. Fill level and external temperature sensor input can be configured to raise an alarm. The external temperature sensor input is compatible with all Aqua Computer temperature sensors.

All variants are also available with a nano coating that will cause water to roll off the inner surface of the borosilicate glass tube.

Technical details:
Dimensions without pump: approx. 56 x 67 x 198 mm
Filling volume: approx. 150 ml
Connection threads: G1/4

Compatible to the following pumps:
- aquastream XT
- Eheim 1046 and pumps identical in construction

Scope of delivery:
One Reservoir
Three sealing screws G1/4 (preinstalled)

Please note: Fittings and pump are not included in delivery, please order seperately.

Further links

Close menu

Jetzt nützliche Details ansehen... more

Close menu

Produktdetails

Farbe:	schwarz
Material:	Acryl
Pumpe vorinstalliert:	Nein
Anschluss:	G1/4" Innengewinde
Fillport:	G1/4" Innengewinde
LED Bohrungen:	nicht vorhanden
Behältertyp:	Aufsatzbehälter
Anzahl Anschlüsse:	3
Pumpenkompatibilität:	für Eheim 1046
Abmessungen:	56 x 67 x 153mm
Volumen:	150ml
Hersteller:	Aquacomputer

Questions & answers... more

Questions & answers

No questions have been asked so far.

Do you have a question?

Read, write and discuss reviews... more

Close menu

Customer evaluation for "Terms and Conditions Aquacomputer aquainlet PRO 150 ml with nano coating, G1/4"

Write an evaluation

Evaluations will be activated after verification.

and Conditions Aquacomputer aquainlet PRO 150 ml with nano coating, G1/4

Further links

Personalised advice

Fast delivery from Germany

Professional advice and service

Good price-performance ratio

Secure payment

Free encore

30 days right of return