Aquacomputer ULTITUBE D5 150 PRO expansion tank for D5 pumps

AGB Aquacomputer ULTITUBE D5 150 PRO Ausgleichsbehälter für D5-Pumpen

Article no: 1019691
Manufacturer no: 34095
EAN: 4260473312529
Weight: 0,93 kg
Available: There are more than 10 units available

204 Visitors show interest

71 Customers have recently purchased this product.

in stock

Payment by instalments available between 400€ and 5000€ value of goods

€99.95 *

Prices incl. VAT plus shipping costs

Please inform me as soon as the product is available again.

Terms and Conditions Aquacomputer ULTITUBE D5 150 PRO Expansion tank for D5 pumps

€99.95 €0.00 Prices incl. VAT plus shipping costs

Save money with the following bundle

Terms and Conditions Aquacomputer ULTITUBE D5 150 PRO Expansion tank for D5 pumps

PUM Alphacool VPP655 - Single Edition PHT EOL

Instead of €169.23 * (5% saved) Price for all: €160.77 *

PUM Alphacool VPP655 - PWM - Single Edition

Instead of €174.18 * (5% saved) Price for all: €165.47 *

The expansion tanks of the ULTITUBE series are equipped with a tube made of borosilicate glass,... more

Close menu

Product information

The expansion tanks of the ULTITUBE series are equipped with a tube made of borosilicate glass, which, in contrast to the Plexiglas often used for tube expansion tanks, has a very high hardness and scratch resistance, a very low thermal expansion and excellent chemical and thermal resistance. The glass tube has an outer diameter of 65 mm and a wall thickness of 5 mm. Both ends of the glass tube are firmly connected with metal rings made of black anodized aluminum, which do not come into contact with the cooling medium. The base and lid of the ULTITUBE series are made of resistant acetal and screwed to the glass tube. A large opening is available for filling the expansion tank after unscrewing the lid.

A filter element made of a fine stainless steel wire mesh is integrated in the bottom of the container and, in addition to functioning as a particle filter, also separates air bubbles. The filter element is integrated in a molded rubber part and can, for example, be rinsed out under running water. The seal in the upper area of the glass tube is also designed as a molded rubber part for easy assembly and is therefore securely positioned when the lid is screwed on.

The PRO version of the ULTITUBE D5 has a gas exchange membrane integrated directly into the cover of the expansion tank. Pressure fluctuations caused by temperature changes are continuously compensated via the membrane without coolant being able to escape.
An RGBpx-compatible LED ring with 13 individually addressable LEDs is included in the scope of delivery and can be used to effectively illuminate the expansion tank. To operate the LED ring, an Aqua Computer control unit with RGBpx output is required (e.g. D5 NEXT, not included in the scope of delivery). At the end of the strip there is a connector for connecting another RGBpx component.
A rubber fastening ring with a stainless steel insert is included in the scope of delivery for an additional, vibration-damped fastening of the expansion tank in the upper area of the glass tube.

All D5 pumps offered by Aqua Computer can be mounted on the bottom of the expansion tank, as well as pumps of the same design from other manufacturers. When developing the expansion tank, attention was paid to optimal flow behavior, the result is extremely quiet and quiet operation of the pump. The pump is attached using a slim, black anodized aluminum ring. It is not possible to use the expansion tank without a pump.

Fastening material for mounting on a side / rear wall or a standing mounting are included in the scope of delivery. Four soft rubber decouplers are included for decoupling.

Technical specifications:

Filling volume: approx. 350 ml
Connection thread: G1 / 4
Dimensions without pump: approx. 72 x 72 x 210 mm
Dimensions with D5 pump (not included): approx. 72 x 72 x 250 mm
Dimensions with D5 NEXT pump (not included): approx. 72 x 72 x 265 mm

Scope of delivery:

An expansion tank
RGBpx compatible LED ring
RGBpx connection cable, length 50 cm
Rubber mounting ring with stainless steel insert
Fastening ring and seal for fastening the pump
Fastening material

Please note:
The expansion tank is supplied without connections, please order suitable connections separately. A D5 pump is also required and is not included in the scope of delivery! When used with a D5 NEXT, the bracket included in the scope of delivery cannot be used; instead, it can be installed directly on the D5 NEXT. Alternatively, a suitable bracket is available as an optional accessory under item number 34111 (not included in the scope of delivery).

Further links

Close menu

Jetzt nützliche Details ansehen... more

Close menu

Produktdetails

Farbe:	schwarz
Pumpe vorinstalliert:	Nein
Anschluss:	G1/4" Innengewinde
Fillport:	G1/4" Innengewinde
LED Bohrungen:	nicht vorhanden
Pumpenkompatibilität:	für 1x D5
Behältertyp:	Sonstige Behälter
Anzahl Anschlüsse:	2
Abmessungen:	72 x 72 x 210mm
Volumen:	350ml
Hersteller:	Aquacomputer
Material:	Acetal, Aluminium, Borosilikatglas

Questions & answers... more

Questions & answers

No questions have been asked so far.

Do you have a question?

Read, write and discuss reviews... more

Close menu

Customer evaluation for "Terms and Conditions Aquacomputer ULTITUBE D5 150 PRO Expansion tank for D5 pumps"

Write an evaluation

Evaluations will be activated after verification.

and Conditions Aquacomputer ULTITUBE D5 150 PRO Expansion tank for D5 pumps

Further links

Personalised advice

Fast delivery from Germany

Professional advice and service

Good price-performance ratio

Secure payment

Free encore

30 days right of return