Terms and Conditions Aquacomputer ULTITUBE D5 50 PRO expansion tank with D5 NEXT pump EOL

AGB Aquacomputer ULTITUBE D5 50 PRO Ausgleichsbehälter mit D5 NEXT Pumpe

Article no: 1024032
Manufacturer no: 34156
EAN: 4260473314813
Weight: 1,046 kg
Available: There are more than 25 units available

550 Visitors show interest

18 Customers have recently purchased this product.

in stock

Payment by instalments available between 400€ and 5000€ value of goods

€199.98 *

Prices incl. VAT plus shipping costs

Please inform me as soon as the product is available again.

Terms and Conditions Aquacomputer ULTITUBE D5 50 PRO expansion tank with D5 NEXT pump EOL

€199.98 €0.00 Prices incl. VAT plus shipping costs

The expansion tanks in the ULTITUBE series are equipped with a tube made of borosilicate glass,... more

Close menu

Product information

The expansion tanks in the ULTITUBE series are equipped with a tube made of borosilicate glass, which, in contrast to the Plexiglas often used for tube expansion tanks, has a very high level of hardness and scratch resistance, very low thermal expansion and excellent chemical and thermal resistance. The glass tube has an outer diameter of 65 mm and a wall thickness of 5 mm. Both ends of the glass tube are firmly connected to metal rings made of black anodized aluminum, which do not come into contact with the cooling medium. The base and lid of the ULTITUBE series are made of durable acetal and are screwed to the glass tube. This means that a large opening is available for filling the expansion tank after unscrewing the lid.

A filter element made of a fine stainless steel wire mesh is integrated into the bottom of the container, which not only functions as a particle filter but also separates air bubbles. The filter element is integrated into a rubber molded part and can be rinsed out under running water, for example. The seal in the upper area of the glass tube is also designed as a rubber molded part for easy assembly and is therefore securely positioned when the lid is screwed on.

The PRO version of the ULTITUBE D5 has a gas exchange membrane integrated directly into the cover of the expansion tank. The membrane continuously compensates for pressure fluctuations caused by temperature changes without allowing coolant to escape.

An RGBpx compatible LED ring with 13 individually addressable LEDs is included and can be used to effectively illuminate the expansion tank. The LEDs can be connected directly to the D5 NEXT pump. At the end of the strip there is a connector for connecting another RGBpx component.

For additional, vibration-damped fastening of the expansion tank in the upper area of the glass tube, a rubber fastening ring with a stainless steel insert is included in the scope of delivery.

An Aqua Computer D5 NEXT pump is mounted directly at the bottom of the expansion tank.

The most important functions of the D5 NEXT at a glance:

· Laing D5 ceramic bearing ball motor for optimum smoothness and durability

· Removable control unit for easy access to electrical connections

· High-resolution OLED display and integrated buttons for direct operation even without a PC

· Integrated RGBpx lighting for lighting effects and error signaling

· Integrated water temperature sensor

· PWM fan output with up to 25 watts of power and speed monitoring

· Fan output can alternatively be used as flow sensor input

· Control parameters can be set in many different ways

· Eight additional measured values can be transferred from the PC to the D5 NEXT using the aquasuite software

· RGBpx LED output for up to 90 addressable LEDs

· RGBpx LED output can alternatively be used as an aquabus interface for connection to an aquaero 5/6

· Alarm buzzer for acoustic alarm signaling

· Power supply via SATA connector

· USB 2.0 interface

· Firmware update via USB

· aquasuite software for convenient setting, evaluation and visualization of all sensor data

Fastening material for mounting on a side/rear wall or for standing installation is included in the scope of delivery. Four soft rubber decouplers are included for decoupling.

Technical data:

Filling volume: approx. 110 ml

Connection thread: G1/4

Supply voltage: 5V, 12V

Maximum total power consumption: 65 W (incl. fan and RGBpx)

Fan output power: maximum 25 watts

Maximum discharge head: 3.7 m / 370 mbar

Dimensions including D5 NEXT pump: approx. 72 x 72 x 165 mm

(All dimensions without fastening material)

In the Ultitube series, the number 50/100/150/200 in the product name refers to the length of the glass tube in millimeters.

Scope of delivery:

An expansion tank with integrated pump
RGBpx compatible LED ring
RGBpx connection cable, length 50 cm
Rubber mounting ring with stainless steel insert
Internal USB connection cable, length approx. 100 cm
Fastening material

Please note: The expansion tank is delivered without connections, please order suitable connections separately.

Further links

Close menu

Jetzt nützliche Details ansehen... more

Close menu

Produktdetails

Farbe:	schwarz
Wassereinlass:	G1/4" Innengewinde
Wasserauslass:	G1/4" Innengewinde
Hersteller:	Aquacomputer

Questions & answers... more

Questions & answers

No questions have been asked so far.

Do you have a question?

Read, write and discuss reviews... more

Close menu

Customer evaluation for "Terms and Conditions Aquacomputer ULTITUBE D5 50 PRO expansion tank with D5 NEXT pump EOL"

Write an evaluation

Evaluations will be activated after verification.

and Conditions Aquacomputer ULTITUBE D5 50 PRO expansion tank with D5 NEXT pump

Further links

Personalised advice

Fast delivery from Germany

Professional advice and service

Good price-performance ratio

Secure payment

Free encore

30 days right of return