EK Water Blocks EK-Quantum Surface S360 - Schwarz | Hochleistungs-Wasserkühlungsradiator

RAD EK Water Blocks EK-Quantum Surface S360 - Schwarz

Article no: 1025665
Manufacturer no: 3831109838198
EAN: 3831109838198
Weight: 1,283 kg
Available: Es sind weniger als 5 Artikel verfügbar

223 Visitors show interest

1 Customers have recently purchased this product.

in stock

Payment by instalments available between 400€ and 5000€ value of goods

€96.90 *

Prices incl. VAT plus shipping costs

Please inform me as soon as the product is available again.

RAD EK Water Blocks EK-Quantum Surface S360 - Black

€96.90 €0.00 Prices incl. VAT plus shipping costs

EK Water Blocks EK-Quantum Surface S360 - Black At just 30mm thick, the EK-Quantum... more

Close menu

Product information

EK Water Blocks EK-Quantum Surface S360 - Black

At just 30mm thick, the EK-Quantum S-Series surface radiators are ideal for cases with limited space. Despite the reduced thickness, they deliver exceptional performance at very low and medium fan speeds. A total of 16 2mm wide copper tubes along the entire length of the radiator ensure optimal coolant flow and do not burden your cooling loop. High-quality finless copper fins with a density of 20 FPI offer the best balance between heat transfer and air resistance for optimal performance even at low speed fan operation. EK would not recommend a push/pull setup on an EK-Quantum S-Series surface radiator as it does not provide a proportional increase in performance. If more cooling power is needed, installing additional radiators is a good option.

New and improved

The EK-Quantum Surface S Series cooler maximizes performance by using a new cooler core. When comparing core-to-core performance, the Surface S cooler performs up to 20% better than its predecessor, the CoolStream SE, due to its improved fin structure and optimized core.

EK-Quantum Surface Premium radiators are based on years of development and market research to deliver the best product in every respect that the market demands. The processing of the materials, the mechanical rigidity and the performance have been taken to a new level. Like all other products in the Quantum Line, EK's brand new surface coolers offer numerous performance improvements, including thermal performance, coolant flow restriction and airflow restriction.

With the included screws, this cooler is compatible with 120mm fans, which have a thickness of 25mm as standard. EK recommends using EK fans or similar with sealed frames. This classic but effective square shape of the fan housing ensures optimal performance in pull (suction) or push (pressure) mode without hydraulic losses, ensuring the optimal cooling performance of your liquid coolers.

Thick extruded aluminum end caps with a contrasting silver finish give the cooler a premium look and feel. They cover the interior and connect the stamped side panels, creating a sturdy structure that is comfortable to handle. The stainless steel side panels are coated with durable semi-gloss black paint, while the fins themselves feature a special black matte coating with a high thermal conductivity coefficient.

M4 screws – standardized, easy to find

Heavy-duty black M4 Philips round head screws are included for ease of use. In general usage scenarios, EK strongly recommends using only the included screws to avoid damage to the cooler itself. However, the M4 screw compatibility allows users to source longer screws if needed. The cooler core is designed in such a way that even if the customer accidentally uses longer screws, it will not affect the structural integrity of the cooler core as they will only collide with the fins.

Easy disassembly – DIY modding dream

The EK Quantum Surface range has been designed and engineered as a modular product range rather than individually sized radiators. Such a design ensures a flawless fit and continuity in appearance while making the disassembly process very simple and straightforward. EK has always supported the DIY modding community, so painting and modifying your Surface radiator is a breeze.

Loop friendly – Don’t worry about your pump

The internal structure of the coolers has been designed with low flow restriction so as not to place unnecessary strain on the rest of the cooling loop. This means that you can add multiple radiators to your cooling loop using just a single pump (D5 or DDC). The coolers are also airflow friendly and low restriction, allowing operation at lower fan speeds while maintaining the same performance. Low airflow restriction ensures that the case is well ventilated and other radiators in the case can breathe properly.

EK-Matrix7 compatible – for the cleanest pipe runs

Since each custom liquid cooling loop is made up of multiple EK products, the most valuable difference in terms of aesthetics and usability comes from the sum of all the parts. To address this problem, EK launched Matrix7, a system that standardizes product dimensions and connector location and spacing. This way, we make liquid cooling loop assembly more intuitive and ensure a clean set of parallel pipe runs easier than ever before.

All EK-Quantum Surface emitters are EK-Matrix7 compatible, meaning they integrate effortlessly with Reflection², the second generation of Quantum distribution panels. This allows the user to easily swap and upgrade between S-, P- and X-series surface emitters within the same enclosure (provided the enclosure supports thicker emitters in the same position).

The EK-Quantum Surface S cooler wins TechPowerUp's Editor's Choice award

The EK-Quantum Surface S radiators have been awarded the Editor's Choice award by TechPowerUp. They praise this product and list the following benefits among others: good value for money, increased case compatibility, excellent thermal performance for the form factor, little restriction of coolant flow, two color options to choose from, modifiable with replacement cover plates and so on. "I will happily recommend the EK-Quantum Surface S," says the reviewer, "and look forward to trying out the rest of the EK-Quantum Surface cooler series!"

Technical and material specifications:

High-quality fins made of 99.9% copper
Copper H90 pipes
End tank chambers made of brass H62
Stainless steel side panels
End caps made of extruded aluminium, silver anodised
Brass nickel-plated adapters and plugs
Dimensions: 405 x 130 x 30 mm (L x W x H)
Weight: 0.95kg
FPI: 20
Connection thread: 2x G1/4 inch
Fan compatibility: 120 x 120 x 25 mm fan
Pressure tested: 1 bar

Attached:

EK-Quantum Surface S-Series Coolers
12 x M4 x 30 mm for 25 mm thick fans
12 x M4 x 5 mm for direct mounting of the cooler to the case.

Designed and engineered in Slovenia, manufactured in China.

Further links

Close menu

Jetzt nützliche Details ansehen... more

Close menu

Produktdetails

Farbe:	schwarz
Anschluss:	2x G1/4"
Lamellen:	Kupfer
Dicke:	29 - 39mm
Hersteller:	EK Water Blocks
Anzahl Lüfter:	3
fan size:	120mm
Fins per inch:	20
Gehäuse:	Edelstahl
Abmessungen (L x B x H):	405x130x30mm

Questions & answers... more

Questions & answers

No questions have been asked so far.

Do you have a question?

Read, write and discuss reviews... more

Close menu

Customer evaluation for "RAD EK Water Blocks EK-Quantum Surface S360 - Black"

Write an evaluation

Evaluations will be activated after verification.

EK Water Blocks EK-Quantum Surface S360 - Black

Further links

Personalised advice

Fast delivery from Germany

Professional advice and service

Good price-performance ratio

Secure payment

Free encore

30 days right of return