Arctic BioniX P120 A-RGB Bundle

Product information

A-RGB for Full Colour Control
The 12 A-RGB LEDs installed in the BioniX P120 A-RGB are autonomously controllable. The BioniX P120 A-RGB is compatible with the common A-RGB standards of leading motherboard manufacturers for the simplest possible use. It can therefore be fully illuminated directly via the A-RGB motherboard connection or via an external controller and synchronized with other hardware lighting.

Easy installation and extension via Connector Technology
The ARCTIC BioniX P120 A-RGB have a modular cable management and use two connections: a power-in and a connector output. ARCTIC uses an 8-pin connector for this, which forwards both the fan and lighting signals and considerably simplifies the cabling *. The included connector block also enables a wireless series connection.
* all necessary cables are included

High-quality plain bearing
Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced, increasing efficiency.
In this way, less heat is generated, there is less bearing noise and the service life of the fan is extended.

Optimised for static pressure
With the BioniX P120 A-RGB, as with the entire P-series, special emphasis was placed on a focused airflow and high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance.
This makes the BioniX P120 A-RGB particularly suitable for use on heat sinks and radiators as well as with aperture plates and filters.

Maximum smoothness, minimum vibration
The operating noise of the newly developed ARCTIC motor is barely noticeable even at the lowest speed.
Thanks to sinus magnetization, the P fan's motor generates only 5% of the commutation vibrations of a conventional DC motor. In addition, the ARCTIC BioniX P120 A-RGB has rubber pads on its contact surfaces for further decoupling.

400 to 2300 rpm regulated via PWM
With a wide speed range and the connector functionality, the fan speed of the BioniX P120 A-RGB can be controlled synchronously with other fans. This reduces the noise development to a minimum while at the same time guaranteeing maximum cooling performance.

Technical Data

General Specifications

Fan Speed: 400 - 2300 rpm
Airflow: 48 CFM | 81,55 m³/h
Static Pressure: 2,1 mm/H2O
Noise Level: 0.45 Sone
RPM Controll: PWM
Connector: 2x A-RGB Fan 8-pin Connector
Fan Bearing: Fluid Dynamic Bearing

Electrical Fan Specifications

Typical Voltage: 12 V DC
Startup Voltage: 7 V
Current: 0.13 A
Cable Length: 400 mm + 80 mm

A-RGB Specifications

Number of LEDs LEDs: 12 A-RGB LEDs
Typical Voltage: 5 V
Current: 0.38 A

Size & Weight

Lenght: 120 mm
Width: 120 mm
Height: 30 mm
Weight: 209 g

Nennspannung:	12V DC
Stromanschluss:	4Pin
RPM Signalübertragung:	Ja
Nenndrehzahlbereich:	2000 - 9000 U/min
Lautstärkebereich:	30 - 49,9 dB(A)
Größe:	120mm
Abmessungen:	120 x 120 x 25mm
Luftförderbereich:	100 - 149 m³/h
Startspannung:	5V
Leistungsaufnahme:	1,56W
Hersteller:	Arctic
Nenndrehzahl:	2300 U/min
Lautstärke:	0,45 Sone
Druck:	2,10mm H2O
Luftförderleistung:	81,55 m³/h
Farbe Rahmen:	schwarz
Farbe Rotor:	schwarz
LED:	ARGB
Lüfterbundle:	4x

Arctic BioniX P120 A-RGB Bundle

Further links

Personalised advice

Fast delivery from Germany

Professional advice and service

Good price-performance ratio

Secure payment

Free encore

30 days right of return