RAD Alphacool NexXxoS HPE-45 Full Copper 360mm Radiator

Alphacool NexXxoS HPE-45 Full Copper 360mm Radiator

Op voorraad – Klaar voor onmiddellijke verzending!

Termijnbetalingen mogelijk tussen € 99 en € 5000 aan goederen

706 Bezoekers tonen interesse

332 Klanten hebben dit product onlangs gekocht.

Alphacool Eiszapfen 13/10mm opschroefmondstuk G1/4 - Diep Zwart

NOK 65,01*

Alphacool Eiszapfen 13/10mm opschroefmondstuk 90° draaibaar G1/4 - Diep Zwart

NOK 86,90*

Alphacool Laing DDC310 - Complete editie ijskap - zilver/acryl

NOK 870,98*

Alphacool Eisbaer Pro Aurora (Solo) - Digitale RGB

NOK 925,98*

Alphacool Tec Protect 2 Helder 1000ml

NOK 152,68*

Alphacool slang AlphaTube HF 13/10 (3/8"ID) - Helder verkocht per meter

NOK 76,78*

NOK 1.197,79 *

Prijzen incl. btw excl. verzendingskosten

Verwittig mij wanneer het product leverbaar is.

RAD Alphacool NexXxoS HPE-45 Full Copper 360mm Radiator

NOK 1.197,79 NOK 0,00 Prijzen incl. btw excl. verzendingskosten

For more than a decade, Alphacool has dominated the market with the NexXxoS Full Copper radiator...meer

Menu sluiten

Productinformatie

For more than a decade, Alphacool has dominated the market with the NexXxoS Full Copper radiator series. Our extensive portfolio of radiator variants is unique in the world. Just like our manufacturing process, which allows us to produce all water-carrying parts and the cooling fins out of pure copper. As a result, the NexXxoS series offers the highest thermal conductivity of any radiator on the market. Thanks to their exceptional performance, the radiators can easily dissipate even extremely high waste heat and have become essential in many areas of the cooling industry.

The next step in evolution: NexXxoS HPE Full Copper Radiator!
The NexXxos Full Copper HPE Radiator uses the same materials as previous NexXxos models, but takes it a step further technically. Due to the condensed internal structure, the number of water channels and copper fins could be increased. Thus, a larger volume of water is in direct contact with the cooling fins and the heat transfer is enormously improved. The higher number of fin rows and their shortening also makes much more efficient use of the cooling surface. Comparison tests* with the conventional NexXxos radiator have shown that a performance increase of 4.5K is possible when using the HPE radiator. At higher ambient temperatures and higher fan speeds, the performance gap with the normal NexXxoS radiators even increases progressively, reaching a possible performance increase of up to 6K.

(* Test setup: NexXxos ST30 360mm radiator vs. NexXxos HPE-30 360mm radiator with Eisbaer cooler and 3x 120mm Rise Aurora fans and on Asus Prime x299 motherboard with Intel i9 10900x CPU with 350W waste heat)

Connection options & mounting
The NexXxoS HPE radiator has two IN or OUT connections with G1/4" threads in the pre-chamber area. On the opposite side is a fill or drain port, which can be used for filling and draining the water circuit. All screws for mounting in the case and for mounting the fans are included with the radiator. Additional screws are not usually required.

Safety first
The NexXxoS HPE radiator has special protective plates placed under all mounting holes to prevent the screws from being screwed in too deeply. This protects the cooling fins and water channels underneath from damage.

Patented screw plugs
All NexXxoS HPE radiators use Alphacool's patented screw plugs. Protruding screw plugs often mean that the radiator cannot be laid flush. Alphacool's screw plugs are fully recessed into the radiator, flush with its surface and allow easy installation in the case.

Technical data radiator
L x W x H	391,5 x 124 x 45mm (+/- 3%)
Quantity of cooling channels	24
Material cooling fins, pre-chambers & channels	copper
Material threads	brass
Material outer housing	stainless steel
Threads	4x G1/4" IN/OUT & 1x Fill-/Drainport G1/4" (max. 5mm thread length)
Possible fan size	120mm
Possible fan assembly	3x one-sided / 6x both-sided
Thread size fan mounting	M3
Pressure tested	0,8 Bar
Maximum working temperature	60°C
Fin density	16 FPI
Weight	1248g
Color	black

Warranty: 10 years
🔗 Warranty Terms

Note on application
Please use only in conjunction with clear transparent water cooling fluids. The particles and additives in Pastel liquids can clog and permanently damage water cooling products such as radiators, pumps, coolers and hoses. This can result in voiding the manufacturer's warranty as well.

Produktdetails

Productnr.:	1021493
Fabrikantnr:	14440
EAN:	4250197144407
Gewicht:	1,508 kg
Beschikbaar:	Er zijn nog meer dan 25 artikelen beschikbaar

Fabrikant:	Alfakoel
Vinnen per inch:	16
Huisvesting:	Staal
Koelkanalen:	Koper
Latten:	Koper
Fan draad:	M3
Grootte ventilator:	120 mm
Afmetingen (L x B x H):	391,5 x 124 x 45 mm
Verbinding:	5x G1/4"
Aantal ventilatoren:	3
Dikte:	39 - 49 mm
Druk getest:	0,8 bar
Kleur:	Zwart