RAD Alphacool NexXxoS HPE-45 Full Copper 140mm Radiator PHT EOL

Alphacool NexXxoS HPE-45 Full Copper 140mm Radiator

In magazzino – Pronto per la spedizione immediata!

Possibilità di rateizzazioni tra 99€ e 5.000€ di merce

293 I visitatori mostrano interesse

53 I clienti hanno acquistato recentemente questo prodotto.

Alphacool Eiszapfen Ugello avvitabile HardTube da 13 mm G1/4 - Cromato

$ 6,38*

Alphacool Ice Tube 13/10 mm acrilico (PMMA) HardTube satinato 80 cm - Set di 4 (320 cm)

$ 25,68*

Alphacool Eiszapfen Ugello avvitabile HardTube da 13 mm G1/4 - Chrome Sixpack

$ 34,20*

Alphacool Eiszapfen Ugello avvitabile HardTube da 13 mm ruotabile di 90° G1/4 - Cromato

$ 9,60*

Alphacool Eisblock XPX Aurora - Acrilico Nero Digitale RGB

$ 49,16*

L14 Alphacool Rise Aurora da 140 mm (140x140x25 mm)

$ 17,09*

$ 85,51 *

Prezzi incl. IVA più spese di spedizione

Informatemi non appena il prodotto è nuovamente disponibile.

RAD Alphacool NexXxoS HPE-45 Full Copper 140mm Radiator PHT EOL

$ 85,51 $ 0,00 Prezzi incl. IVA più spese di spedizione

For more than a decade, Alphacool has dominated the market with the NexXxoS Full Copper radiator... altro

Chiudi menu

Informazioni sul prodotto

For more than a decade, Alphacool has dominated the market with the NexXxoS Full Copper radiator series. Our extensive portfolio of radiator variants is unique in the world. Just like our manufacturing process, which allows us to produce all water-carrying parts and the cooling fins out of pure copper. As a result, the NexXxoS series offers the highest thermal conductivity of any radiator on the market. Thanks to their exceptional performance, the radiators can easily dissipate even extremely high waste heat and have become essential in many areas of the cooling industry.

The next step in evolution: NexXxoS HPE Full Copper Radiator!
The NexXxos Full Copper HPE Radiator uses the same materials as previous NexXxos models, but takes it a step further technically. Due to the condensed internal structure, the number of water channels and copper fins could be increased. Thus, a larger volume of water is in direct contact with the cooling fins and the heat transfer is enormously improved. The higher number of fin rows and their shortening also makes much more efficient use of the cooling surface. Comparison tests* with the conventional NexXxos radiator have shown that a performance increase of 4.5K is possible when using the HPE radiator. At higher ambient temperatures and higher fan speeds, the performance gap with the normal NexXxoS radiators even increases progressively, reaching a possible performance increase of up to 6K.

(* Test setup: NexXxos ST30 360mm radiator vs. NexXxos HPE-30 360mm radiator with Eisbaer cooler and 3x 120mm Rise Aurora fans and on Asus Prime x299 motherboard with Intel i9 10900x CPU with 350W waste heat)

Connection options & mounting
The NexXxoS HPE radiator has two IN or OUT connections with G1/4" threads in the pre-chamber area. On the opposite side is a fill or drain port, which can be used for filling and draining the water circuit. All screws for mounting in the case and for mounting the fans are included with the radiator. Additional screws are not usually required.

Safety first
The NexXxoS HPE radiator has special protective plates placed under all mounting holes to prevent the screws from being screwed in too deeply. This protects the cooling fins and water channels underneath from damage.

Patented screw plugs
All NexXxoS HPE radiators use Alphacool's patented screw plugs. Protruding screw plugs often mean that the radiator cannot be laid flush. Alphacool's screw plugs are fully recessed into the radiator, flush with its surface and allow easy installation in the case.

Technical data radiator
L x W x H	173,5 x 144 x 45mm (+/- 3%)
Quantity of cooling channels	28
Material cooling fins, pre-chambers & channels	copper
Material threads	brass
Material outer housing	stainless steel
Threads	4x G1/4" IN/OUT & 1x Fill-/Drainport G1/4" (max. 5mm thread length)
Possible fan size	140mm
Possible fan assembly	1x one-sided / 2x both-sided
Thread size fan mounting	M3
Pressure tested	0,8 Bar
Maximum working temperature	60°C
Fin density	16 FPI
Weight	720g
Color	black

Warranty: 10 years
🔗 Warranty Terms

Note on application
Please use only in conjunction with clear transparent water cooling fluids. The particles and additives in Pastel liquids can clog and permanently damage water cooling products such as radiators, pumps, coolers and hoses. This can result in voiding the manufacturer's warranty as well.

Produktdetails

Numero Ordine:	1022214
N. produttore:	14474
EAN:	4250197144742
Peso:	0,887 kg
Disponibile:	Ci sono più di 25 articoli ancora disponibili

Produttore:	Alphacool
Alette per pollice:	16
Alloggiamento:	Acciaio
Canali di raffreddamento:	Rame
Doghe:	Rame
Filo del ventaglio:	M3
Dimensioni della ventola:	140 mm
Dimensioni (L x P x A):	173,5 x 144 x 45 mm
Connessione:	5xG1/4"
Numero di fan:	1
Spessore:	39-49 mm
Testato a pressione:	0,8 bar
Colore:	Nero