Alphacool Repack Réservoir Baie Duale 5,25" - Rev.2 - Boîtier

  • 45250
  • 15033
  • 4250197150330
  • 0,695 kg
  • Il y a encore plus de 50 articles disponibles
1903 Les visiteurs montrent de l'intérêt
253 Les clients ont récemment acheté ce produit.

en stock

Paiement échelonné disponible entre 400€ et 5000€ de valeur de marchandise

29,68 € * 45,99 € * (35,46% )

Prix dont TVA plus frais de port

Avertissez-moi lorsque l'article sera de nouveau disponible.

Ich habe die Datenschutzbestimmungen zur Kenntnis genommen.

AGB Alphacool Repack Réservoir Baie Duale 5,25
AGB Alphacool Repack Réservoir Baie Duale 5,25" - Rev.2 - Boîtier
29,68 € 45,99 € Prix dont TVA plus frais de port
The second version of the Alphacool Repack Dual Bayres 5,25" is now available! Based on the...plus
Informations sur le produit

The second version of the Alphacool Repack Dual Bayres 5,25" is now available!

Based on the development of the Alphacool Repack Dual 5.25 Bay Station, this Bay reservoir also brings its advantages to the table: Easy mounting, compact dimensions and appealing design! All of these features and many more are implemented in the Alphacool Repack Single Bayres. But Alphacool would not be Alphacool, if this new product would not also have some extremely interesting new features, which were not available until now!

The Alphacool Repack Dual Bayres 5,25" - Rev.2 is designed for installation in the front of an enclosure. Two vacant 5.25” drive bays are needed. By default, the connection of in- and Outlet can be achieved via ¼” threaded openings. Additionally Alphacool offers the possibility to use 3/8” threads for reduced flow resistance. Of course all four openings can also be used parallel, e.g. to allow installation of a second cooling loop.

New technologies implemented in the Alphacool Repack Dual Bayres:
So far everything sounds like a standard reservoir, but the developers have integrated some great features to improve the reservoir and its functionality:

Anti Cyclone:
Unlike most reservoirs, where the coolant is sent around multiple corners, still leaving micro-bubbles in the coolant, this reservoir utilizes a new technology: Both In- and Outlet openings are equipped with a special filter which eliminates even the smallest bubbles in the coolant!

Filling:
Filling has always been a hassle with standard slot-in reservoirs: Unscrew, pull out, fill, push in and tighten screws again. Enough of this! The front of this reservoir has a filling straw which can be taken out by unscrewing it. As it is hollow, it can now be used for filling of the reservoir. We recommend using a filling bottle or funnel from our portfolio.

Design:
The front of the reservoir, the component which mainly remains visible after installation, is just beautiful to look at: Plexi, Acetal and a fill level indicator in combination with the typical Alphacool copper create a truly elegant design. Lighting is the next step towards a perfect system: At the rear of the reservoir, up to six 5mm LEDs can be inserted.
Highlight: From the top a 10cm long cold light cathode can be inserted! This is the ultimate lighting source four your reservoir. In combination with the LEDs it is even possible to have different colors inside of the reservoir. Especially with a Heatmaster as a controller, the possibilities are endless!

Modular design:
All Alphacool Repack Bayres of the second revision feature a modular design. This means that a standard of this reservoir can be rebuilt to e.g. a pump reservoir. Different pump reservoirs can also be made compatible with other pump types, or be transformed into a standard reservoir. This is possible, as the reservoir is not glued together at the back, but rather screwed together and sealed by a gasket.

More power, better looks, easy handling and high quality: This is truly a First-class reservoir for your system!

Technical specifications: 

Material: Plexiglas/Acetal, brass
Color: Transparent/black/copper
Connection threads: 2x ¼“ and 2x 3/8”
Dimensions (L x W x H): 91 x 148 x 84mm
Pre-drilled holes for 6x 5mm LEDs
Mount for 10cm CCFL

Conforms with ROHS

Extent of delivery:
1x Alphacool Repack Dual Bayres 5,25" - Rev.2
6x Mounting screws
2x 3/8” screw plugs
Allen key

Please note:
Due to the large number of different enclosures, complications may arise when inserting the Dual reservoir. The dimensions of the reservoir were made to fit flush in the front of the enclosure, meaning that internal modifications to the enclosure may be needed for installation.

Note: The copper-colored logo is covered by a protective foil. To have the logo shining and clean, simply remove this foil.

Note regarding cathodes:
We have measured that the cathodes have manufacturing tolerances of up to 0.3mm, even amongst the cathodes in the same package. As the fit of the cathodes is meant to hold them in place, it might be that due to the tolerances the cathodes will not fit at first. The small amount of excess material can easily be removed with a few brushes of sandpaper.

Important Note: Please note that the firm Alphacool International GmbH accepts no liability for damages of this product by using other coolants. We would like to point out that other coolants as inhibitors often contain or other corrosive substances attack the acteal, plase only usw our Cape Kelvin Catcher.

 

This product has been tested for you
Whitex Modd

Dieses Produkt wurde für Sie getestet
Whitex Modd

Remarque sur l'utilisation
A n'utiliser qu'en combinaison avec des liquides de refroidissement à eau clairs et transparents. Les particules et les additifs contenus dans les liquides Pastell peuvent obstruer et endommager durablement les produits de refroidissement à eau tels que les radiateurs, les pompes, les radiateurs et les tuyaux. Cela peut également entraîner l'annulation de la garantie du fabricant.

Liens complémentaires

Jetzt nützliche Details ansehen... plus
Produktdetails
fabricant: Alphacool
couleur: schwarz
matériel: Acryl, Messing, POM
compatibilité des pompes: für Durchflusspumpen
Pompe prémontée: Nein
connecteur: G1/4" Innengewinde
orifice de remplissage: G1/4" Innengewinde
Trous de LED: disponible (pour LEDs 5mm)
type de contenant: Sonstige Behälter
Nombre de connexions: 2
mensurations: 91 x 148 x 84mm
Questions et réponses plus
Questions et réponses
Aucune question n'a encore été posée.
Vous avez une question ?
Note: Votre question sera visible publiquement et pourra - en plus de notre support - être traitée par un membre de notre communauté. Vous pouvez configurer votre nom visible publiquement et vos notifications par e-mail dans votre compte client.
Lire, écr. et débatt. des analyses…plus
Évaluations de clients pour "AGB Alphacool Repack Réservoir Baie Duale 5,25" - Rev.2 - Boîtier"
Écrire une évaluation
Les évaluations sont publiées après vérification.

Les champs suivis d'un * sont des champs obligatoires.

Ich habe die Datenschutzbestimmungen zur Kenntnis genommen.