WÄM Alphacool Core 2-Komponenten Wärmeleitkleber 5g

Alphacool Core 2-component heat conducting adhesive

In stock – Ready for immediate dispatch!

Payment by instalments available between 99€ and 5000€ value of goods

464 Visitors show interest

205 Customers have recently purchased this product.

Alphacool Eisplateau anti-static work and assembly mat 120x60cm

€59.38*

Alphacool GPU RAM Copper Heatsinks 10x10mm - 10 pcs.

€12.88*

Alphacool GPU RAM Copper Heatsinks 14x14mm - 10 pcs.

€15.88*

Alphacool Eisfrost Xtreme liquid metall paste 1g

€6.91*

Alphacool Eistools assembly gloves size L - Black

€1.48*

€4.93 *

Prices incl. VAT plus shipping costs

(€986.00 * / 1000 Gramm)

Please inform me as soon as the product is available again.

WÄM Alphacool Core 2-component heat conducting adhesive

€4.93 €0.00 Prices incl. VAT plus shipping costs

Alphacool 2-part thermal adhesive is perfect for mounting coolers onto items such as motherboard... more

Close menu

Product information

Alphacool 2-part thermal adhesive is perfect for mounting coolers onto items such as motherboard VRMs. The 2-part epoxy-based adhesive is the optimal choice when coolers need to be mounted more securely onto the CPU or GPU of single-board computers (Raspberry PI, ODROID, Arduino, Cubieboard etc.). The field of application is so wide that even coolers on electronic components in power amplifiers or RC vehicles can be reliably and stably bonded.

Properties
The Alphacool 2-part thermal adhesive is electrically non-conductive. The high metallic content of aluminium nitride (70 - 73 %) guarantees optimal thermal conductivity. The thermal adhesive creates a stable adhesive bond. Due to the material composition, mechanical variances between the components to be bonded can also be compensated well. Surface curing is achieved after 2h (at 25°C ambient temperature). Complete curing takes place within 5 to 7 days (at 25°C ambient temperature).

Application
All surfaces must be clean and free of grease, dust or contaminants. Important: The processing time is limited! As a rule, the processing time is about 10 minutes until the adhesive starts to cure. Adhesive (black) and applicator (yellow) must be thoroughly mixed in a ratio of 4:1 on a clean surface for approx. 2 to 3 minutes with a spatula. Perfect mixing is important to ensure an optimum bond. The two-part adhesive can then be applied thinly to the surfaces to be bonded using a spatula. Finally, the components to be bonded are pressed together. Higher ambient temperatures during processing ensure effective curing of the adhesive and increase strength at higher temperatures.

Technical data
Mixing ratio (adhesive : activator)	4 : 1
Surface curing (at 25°C)	2 h
Total curing (at 25°C)	5-7 Days
Boiling point	>200°C
Flash point	>88°C
Specific gravity (yellow component)	0,97 g/cm3
Specific gravity (black component)	2,08 g/cm3

Ingredients (component black)
Aluminium nitride	70 - 73 %
Epoxy resin	20 - 22 %
Epoxy diluent	4 - 6 %
Carbon black	0,5 - 1 %
Substituted silane	0.1 - 0.2 %
Total weight	4 g

Ingredients (component yellow)
Polyamide	80 - 100 %
Additive	0 - 5 %
Total weight	1 g

Product details

Article no:	1020421
Manufacturer no:	13004
EAN:	4250197130042
Weight:	0,021 kg
Available:	There are more than 250 units available

Manufacturer:

Alphacool